OOhPaints

●  Our Services

Waterproofing

Roof, terrace, bathroom and external wall waterproofing that stops seepage at its source — before it ruins plaster, paint and furniture.

Weathered wall with cracks and damp stains before repair

●  Stop Leaks at the Source

Waterproofing that protects everything above and below it

Damp patches, bubbling paint and musty corners are rarely a paint problem. They are a water problem. Repainting over seepage only hides it for a few weeks. Our waterproofing service finds where water is getting in — a cracked roof slab, failed bathroom grout, porous external plaster — and seals it with the right system.

We use cementitious coatings, liquid-applied membranes and crack-bridging treatments depending on the surface, then allow proper curing before any finishing paint is applied.

●  Waterproofing Solutions

Solutions for every leak point

We inspect first to find the real entry point, then recommend the system that suits that surface and exposure.

Roof & terrace coating

Liquid-applied, UV-resistant membrane over cleaned, repaired roof slabs, with extra layers at joints and drains.

Roofs

Bathroom & wet areas

Sealing of floors, wall junctions and plumbing penetrations before tiling or around existing fixtures.

Bathrooms

External wall treatment

Crack repair and water-repellent coatings for walls exposed to driving rain.

Facades

Water tank & sunken areas

Cementitious waterproofing for tanks, planters and sunken slabs that hold water.

Tanks & planters

●  Warning Signs

Signs you need waterproofing before you repaint

Look for paint that bubbles or peels in patches, white salty deposits on walls, damp stains on ceilings below the roof or a bathroom, and musty smells that return after cleaning. Each one points to moisture moving through the structure.

Treating the cause first protects your investment in paint and plaster — and prevents slow damage to reinforcement, wiring and furniture.

Typical curing check before finishing coats
0 h
Follow-up visit after completion
0 -day
Painter on a ladder working on a brick house exterior

●  What's Included

What our waterproofing service includes

Leak investigation

Moisture readings and visual checks to trace where water is entering.

Surface repair

Loose screed removed, cracks opened and filled, joints reinforced.

Membrane or coating

The right waterproof system applied in the correct number of coats.

Flood test where possible

Roof and wet areas checked for leaks before final handover.

●  Our Process

Our waterproofing process

Step 1

Inspect

Trace moisture and assess the surface.

Step 2

Prepare

Clean, repair cracks and treat joints.

Step 3

Apply

Lay membrane or coating in multiple coats.

Step 4

Test & hand over

Check for leaks and allow full curing.

●  Questions & Answers

Common questions about waterproofing

Answers to common questions about leaks and damp.

For some roofs and terraces we can apply coatings over existing tiles after cleaning and repairing joints. Bathrooms with leaks behind tiles usually need targeted re-grouting or partial removal. We confirm the option after inspection.

It depends on the system and weather. We allow full curing and check moisture levels before any finishing paint is applied.

Dry months are best, ideally well before the rainy season so the coating can cure properly.

Once the water source is sealed, damp walls dry out over time. We then treat salts and repaint the affected areas.

●  Related Services

Often booked together

Interior Painting

Smooth, even walls and ceilings with crisp cut-in lines, careful furniture protection and low-odour paints for lived-in homes.

Exterior Painting

Weather-resistant coating systems that resist fading, algae and peeling, applied after a full wash, crack fill and primer.

Commercial Painting

Offices, shops and showrooms painted on schedules built around your trading hours, with clean handovers floor by floor.

Stop leaks before the next rain

Book a free leak inspection and get a written plan to fix the source, not just the stain.