● Our Services
Doors, frames, furniture, grills, gates and railings — sanded, sealed and finished in lacquer, polish or enamel that resists daily wear and rust.
● Service Overview
Wooden doors and metal grills take more knocks, sun and humidity than any wall. A quick coat of paint over a worn surface soon flakes, yellows or rusts again. We strip back or sand to a sound base, treat rust and raw wood, and apply finishes designed for the job.
For wood we offer polish, PU and melamine lacquers in clear or tinted finishes. For metal we use rust converters, zinc-rich or red-oxide primers and durable enamel topcoats.
● What's Included
Old finish sanded or stripped back to a sound, clean surface.
Wire-brushing, rust conversion and anti-corrosive priming on metal.
Wood pores filled and stained to an even tone before lacquer.
Hand-brushed or spray-applied topcoats in your chosen sheen.
Light sanding between coats for a finish that feels as good as it looks.
Handles, hinges and locks masked or removed and refitted carefully.
● Finish Types
We recommend a finish based on where the item sits, how often it is touched and how much sun and moisture it gets.
Furniture
A traditional, warm finish that brings out the depth of solid wood grain.
Doors & frames
A hard-wearing clear or tinted coat for doors and frames that see daily use.
Interior wood
An economical lacquer with good clarity for interior woodwork.
Metal
Glossy, durable protection for grills, gates and railings.
Exposed metal
Rust converter, red-oxide or zinc primer plus enamel topcoat.
Decks & panels
Colour change while keeping visible grain, sealed against moisture.
● Our Process
Step 1
Check the surface, previous coating and rust or rot.
Step 2
Remove failing finish and sand to a sound base.
Step 3
Treat rust, prime metal, fill and stain wood.
Step 4
Apply finish coats with light sanding between.
● Why It Matters
Using wall paint on doors or grills is one of the most common causes of early peeling. Wood moves with humidity and metal rusts from the inside out — both need primers and topcoats built for those conditions.
We match the product to the exposure: tougher lacquers for main doors, UV-stable finishes for sunny balconies and anti-corrosive systems for coastal or humid locations.
● Questions & Answers
What clients ask about polishing and enamel work.
Yes. Most doors and frames are finished in place with careful masking. Furniture can be finished on site or collected for workshop finishing.
Touch-dry times are short, but full hardness takes several days. We advise how soon each item can be used normally.
Proper rust treatment and priming slow corrosion significantly. Exposed metal still benefits from a maintenance coat every few years.
Yes. We test stain mixes on a hidden area until the tone matches.
● Related Services
Smooth, even walls and ceilings with crisp cut-in lines, careful furniture protection and low-odour paints for lived-in homes.
Weather-resistant coating systems that resist fading, algae and peeling, applied after a full wash, crack fill and primer.
Feature walls in sand, rustic, Venetian plaster, stucco or metallic finishes that add depth without crowding a room.
Ask for a free assessment of your woodwork and metalwork and a written quotation.