OOhPaints

●  Our Services

Wood & Metal Finishing

Doors, frames, furniture, grills, gates and railings — sanded, sealed and finished in lacquer, polish or enamel that resists daily wear and rust.

Enamel and primer paint tins on a shelf

●  Service Overview

Finishes that protect wood and metal for years

Wooden doors and metal grills take more knocks, sun and humidity than any wall. A quick coat of paint over a worn surface soon flakes, yellows or rusts again. We strip back or sand to a sound base, treat rust and raw wood, and apply finishes designed for the job.

For wood we offer polish, PU and melamine lacquers in clear or tinted finishes. For metal we use rust converters, zinc-rich or red-oxide primers and durable enamel topcoats.

●  What's Included

What our finishing service includes

Surface sanding

Old finish sanded or stripped back to a sound, clean surface.

Rust treatment

Wire-brushing, rust conversion and anti-corrosive priming on metal.

Grain filling & staining

Wood pores filled and stained to an even tone before lacquer.

Lacquer or enamel

Hand-brushed or spray-applied topcoats in your chosen sheen.

Smooth hand feel

Light sanding between coats for a finish that feels as good as it looks.

Hardware care

Handles, hinges and locks masked or removed and refitted carefully.

●  Finish Types

Finishes for wood and metal

We recommend a finish based on where the item sits, how often it is touched and how much sun and moisture it gets.

Furniture

French polish

A traditional, warm finish that brings out the depth of solid wood grain.

Doors & frames

PU lacquer

A hard-wearing clear or tinted coat for doors and frames that see daily use.

Interior wood

Melamine finish

An economical lacquer with good clarity for interior woodwork.

Metal

Synthetic enamel

Glossy, durable protection for grills, gates and railings.

Exposed metal

Anti-rust system

Rust converter, red-oxide or zinc primer plus enamel topcoat.

Decks & panels

Wood stain & seal

Colour change while keeping visible grain, sealed against moisture.

●  Our Process

How we finish wood and metal

Step 1

Assess

Check the surface, previous coating and rust or rot.

Step 2

Strip & sand

Remove failing finish and sand to a sound base.

Step 3

Prime & fill

Treat rust, prime metal, fill and stain wood.

Step 4

Topcoats

Apply finish coats with light sanding between.

●  Why It Matters

The right finish for each surface

Using wall paint on doors or grills is one of the most common causes of early peeling. Wood moves with humidity and metal rusts from the inside out — both need primers and topcoats built for those conditions.

We match the product to the exposure: tougher lacquers for main doors, UV-stable finishes for sunny balconies and anti-corrosive systems for coastal or humid locations.

Typical lacquer or enamel build
0 -coat
Rust treated before priming
0 %
Paint roller resting in a tray of white paint

●  Questions & Answers

Common questions about wood & metal finishing

What clients ask about polishing and enamel work.

Yes. Most doors and frames are finished in place with careful masking. Furniture can be finished on site or collected for workshop finishing.

Touch-dry times are short, but full hardness takes several days. We advise how soon each item can be used normally.

Proper rust treatment and priming slow corrosion significantly. Exposed metal still benefits from a maintenance coat every few years.

Yes. We test stain mixes on a hidden area until the tone matches.

●  Related Services

Often booked together

Interior Painting

Smooth, even walls and ceilings with crisp cut-in lines, careful furniture protection and low-odour paints for lived-in homes.

Exterior Painting

Weather-resistant coating systems that resist fading, algae and peeling, applied after a full wash, crack fill and primer.

Wall Texture & Design

Feature walls in sand, rustic, Venetian plaster, stucco or metallic finishes that add depth without crowding a room.

Bring doors and grills back to life

Ask for a free assessment of your woodwork and metalwork and a written quotation.