OOhPaints

●  Painting Tips · 12 October 2026

How to choose interior paint colours that work in every light

By the OOhPaints team · 12 October 2026 · 6 min read

Choosing a paint colour from a small card in a shop is one of the most common sources of regret in home decorating. A shade that looks soft and warm under store lighting can turn grey, green or flat once it covers four walls in your home. The good news: a simple, methodical approach removes most of the guesswork.

1. Start with the light, not the colour

Natural light changes colour more than anything else. Rooms that receive strong morning light tend to make colours look brighter and warmer early in the day and cooler later. Rooms with little direct sunlight make most colours look darker and slightly cooler all day. Before you choose, spend a day noticing when each room gets light and what kind of artificial lighting you use in the evening — warm white bulbs add yellow, cool white bulbs add blue.

2. Look at the undertone

Every neutral has an undertone. Beiges can lean pink, yellow or green; greys can lean blue, green or violet; whites can be warm or stark. Hold your shortlisted cards against a sheet of plain white paper — the undertone becomes much easier to see. Then compare them with fixed elements in the room such as floor tiles, wooden doors, curtains and large furniture. A wall colour that fights a floor undertone will always look slightly wrong.

3. Choose the sheen for how the room is used

Sheen affects both appearance and durability:

  • Matt hides small wall imperfections and gives a soft, modern look — ideal for bedrooms, living rooms and ceilings.
  • Eggshell has a gentle sheen and wipes clean more easily — good for dining areas and passages.
  • Satin is scrubbable and resists moisture — the practical choice for kitchens and children’s rooms.
  • Semi-gloss enamel is best kept for doors, frames and skirting, where durability matters most.

4. Test properly before committing

Never decide from a card alone. Ask for test patches — at least half a square metre — painted directly on the wall, ideally two coats over the existing colour. Place patches on a wall that gets direct light and one that stays in shadow. Look at them in the morning, afternoon and evening, with lights on and off. Our crews apply test patches during the consultation for this reason.

5. Plan the whole home, not one room

Colours seen together through open doors should feel related. A simple rule of thumb is to pick one main neutral for shared spaces such as living rooms and passages, then use deeper or more expressive shades in rooms you move into separately, like bedrooms and studies. Keeping ceilings and trims consistent across the home also ties different wall colours together.

6. Use accent walls deliberately

An accent wall works best on the wall your eye naturally falls on when entering a room — usually behind a bed, sofa or dining table. Choose a deeper tone of a colour already used elsewhere, or consider a textured finish for depth without loud colour.

Quick checklist before you buy

  • Observed the room’s light at different times of day
  • Checked undertones against floors and furniture
  • Chosen sheen based on how the room is used
  • Approved two-coat test patches on the actual wall
  • Confirmed the shade code and paint range in your quotation

If you would like a second opinion, our team offers colour guidance as part of every free site inspection.

Ready to start your project?

Tell us what you are planning and we will arrange a free site inspection.